Fuel tank could be leaking due to age and bad quality of the fuel. water could be mixed in fuel can cause corrosion and sediment deposits that cause fuel flow less smoothly.
To avoid the leak of fuel tank, it need to be cleaned.
The first step is to release the tank from the bike frame.
After that the remaining gasoline spilled or stored in containers or buckets that have been provided. After all the gas is exhausted, then enter the mixed water and detergent or a pumice stone marbles. Why use marbles? The function of pumice marbles or earlier is to peel sludge and crust that is on the inside. Note that, the water was quite 1 / 3 the size of the tank.
After that drain the tank by opening and closing of the tap hole. If it still remained in the tap water before, then it can be aspirated using a small injection or commonly used for printer ink. Position dried them with holes facing down tanks. This drying process can take up to 4 hours to dry completely.
While waiting for the dry tank could also clean the faucet with a way to brush using an old toothbrush. To ensure there is no more water can blow pressurized air into the top. If the hole faucet cold out there it means the remaining water. Do not ever try to dry it by wipe away with some cloth, because it could have cloth left and causing new deposits. also not recommended using a tissue or paper.
This process can be done once a year to improve the tank durable.
No comments:
Post a Comment